COLVILLE FASTENERS LIMITED
Return
Print
Email
3M™ Scotch-Weld™ Structural Plastic Adhesive, DP8010, blue, 17.24 fl. oz. (490 ml)
Call For Price
- Part Number: 7100036719
- UPC:
Quantity:
Add To Cart
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 is a blue, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, corona treatment, or priming. Simply wipe the surfaces with isopropanol to remove mould release agents, dust dirt, etc. 3M Scotch-Weld Structural Plastic Adhesive DP8010 also bonds metals, ceramics, wood, and most plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil (0.20 mm) spacer beads for bond line spacing. Our 3M Scotch-Weld Structural Plastic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10-minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72 F /22 C). Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
Specifications
Details
Industrial Category:
Adhesives, Sealants and Tape
Industrial Subcategory:
Glues and Cements
Industrial Subtype:
Adhesives
Adhesive Type:
Acrylic
Application:
Small Joint Assembly , Bonding Composite Materials , Sealing , Potting , Mounting & Trim Attachment , Encapsulating , Panel to Frame/Stiffner to Panel Assembly
Color Family:
Blue
Container Size (Imperial):
16.57 fl oz
Container Size (Metric):
490.0 mL
Design Challenges:
Noise Vibration & Harshness Control NVH
Full Cure Time:
8-24 Hours @ 72 F (22 C)
Hardness:
55-60 Shore D
Indoor/Outdoor:
Both
Maximum Operating Temperature (Celsius):
66.0 °C
Maximum Operating Temperature (Fahrenheit):
250.0 °F
Open Time:
10 min
Physical Form:
Flowable Liquid
Product Color:
Blue
Product Form:
Cartridge
Product Key:
DP8010
Product Type:
Acrylic
Set Time:
10 Minutes
Shear Strength:
2700.0 psi
Specific Gravity:
1.01
Storage Temperature:
<=40 Degree Fahrenheit
Storage Temperature (Celsius):
4 °C
Substrate:
Hardwood
Substrate 1:
Plastic (High Performance Nylon)
Substrate 2:
Glass & Ceramics
UPC Code:
00051115716010
Viscosity:
Self-leveling
Viscosity Range (cps) at Room Temperature:
Base: 27,000, Accelerator: 17,000 – 40,000
Volume (Imperial):
17.24 fl oz
Volume (metric):
490.0 mL
Work Time:
8 min
Other Details
and metals
and welding
composites
Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
Formulated to bond multi-material assemblies such as LSE plastics
Medium viscosity allows controlled dispensing
rivets
Strong adhesive can replace screws
thermoplastics